Manufactured in North Carolina

Made right here

Search Results

Displaying 1 – 100 of 105 results

Pittsboro, NC

(Visit Page)

The complexity of today’s energy challenges require the ultimate in coordinated innovation pushing the boundaries of science and math. 3DFS is a vertically integrated product development company that researches the world’s most challenging energy problems and delivers the highest caliber sustainable solutions with the utmost simplicity in design and implementation. We recognize the challenge that we are facing and pride ourselves on the enormity of the task. We expect to meet the challenge…

Fletcher, NC

(Visit Page)

Accurate Technology manufactures Linear Digital Measuring Systems.

Nashville, NC

(Visit Page)

ADCI is an Electronics Manufacturing Service Provider(EMS)with core competencies in printed circuit board assembly and layout services, cable and wire harness assembly, chassis and electromechanical assembly, and final assembly integration including calibration and test.

Mooresville, NC

(Visit Page)

Advanced Detection Technology is a world-renowned security and access control solutions manufacturer specializing in Under Vehicle Inspection Systems (UVIS).

Hayesville, NC

(Visit Page)

Advanced Digital Cable Inc. (ADC) was founded in 1997 and began making coaxial cable for the booming digital cable market. Since that time ADC has grown to be a key manufacturer of not only digital coaxial cable but a wide range of high performance 50 Ohm cables and connectors for RF communications and transmission. Nestled in the Smoky Mountains, ADC was built from the ground up with progressive an innovative technology and equipment. Its people represent over 350 years of wire and cable…

Mount Airy, NC

(Visit Page)

Advanced Electronic Services, (AES) was founded in 1992, beginning by specializing in industrial electronic repair. With determination, pride in workmanship, and the desire to provide quality service, AES continues into the future, with 100% customer focus. We know every repair is integral to your company’s success. If you have an industrial repair need, we’d like to show you how exceptional AES is!

Murphy, NC

(Visit Page)

We design and manufacture switch-mode power supplies for use in high- or low-voltage applications in varied markets including aerospace and defense, electric vehicle, robotics and unmanned systems, communications and data, field test equipment, and others. Our rugged AC and DC power supply units are built for high reliability and efficiency. Get in touch with one of our knowledgeable members to find out how we can custom design the power electronics for your application!

Canton, NC

(Visit Page)

ALLTEC is an international, full-service company specializing in customized design & engineering solutions for grounding/earthing & bonding, surge/transient protection, and lightning protection. We offer decades of knowledge and experience to our customers, advising of the best methods for risk mitigation, and ultimately applying those evaluations as comprehensively engineered solutions for today’s infrastructure challenges.

Pittsboro, NC

(Visit Page)

Alpha Install designs and manufactures antenna cables, jumpers, and wide area wireless network communication nodes for resellers, VARs, OEMs, and wirless carriers. These node serve to facilitate Machine-to-Machine (M2M) communications over wide area networks (WAN) across Enterprise customer's 'outside plant'. The nodes also work with digital video cameras for rapid deploy remote surveillance. Alpha Install also contracts to install the nodes onsite for customers.

Charlotte, NC

(Visit Page)

Founded in 1990, American Circuits fabricates printed circuit boards and builds turnkey assemblies locally in Charlotte, NC. We serve all industries from defense to energy with diverse applications from robotics to LED lighting.

We are ISO 9001:2008 Certified, ITAR Registered, and consistently receive the top environmental quality awards every year.

PINEVILLE, NC

(Visit Page)

Registered USA Defense Dept vendor #3jxp5; Registered USA State Dept #m19281 (licensing for export military electronic instruments/components)

Charlotte, NC

(Visit Page)

ATI is a contract manufacturer providing electronic manufacturing services that range from rapid prototyping to full turn-key projects

Morrisville, NC, NC

(Visit Page)

We manufacture Electrical PWBA and Box level electronic assemblies. We are ITAR certified

Garner, NC

(Visit Page)

AT Components is a manufacturer and distributor of industrial control products. Capabilities to design, develop, and manufacture custom solutions and value-added assembly for a variety of electro-mechanical products.

Concord, NC

(Visit Page)

We pride ourselves on cable and harness USA made quality products. We encourage you to watch the video and view our product lines on our website. Our most recent project is our involvement with GNOMAD - (network on the move. For any safety entity MILITARY,HOMELAND SECURITY SWAT, RED CROSS, GNOMAD has so much to offer.

Asheville, NC

(Visit Page)

Design, Engineer, and Manufacturing of Transportable and Vehicle Satellite Communications Antennas

Apex, NC

(Visit Page)

Balddog is a full website services business. We offer website hosting, design, content management systems, blogs, search engine optimization (SEO), and application development. Balddog has designed business logos as well as custom applications such as Online Conferencing, Online Testing, Online Surveys, and Online Sports Registration.

Fuquay Varina, NC

(Visit Page)

Design and manufacture of Fiber Optic cables for use in telco and telecom industry.

Charlotte, NC

(Visit Page)

Blue Nano is a nanomaterials manufacturer that develops high quality, cost effective and reliable nano-focused industrial solutions. We serve universities, independent research labs and OEM manufacturers in a wide variety of sectors ranging from Transparent conductors, Display, lighting to energy to healthcare.

Leland, NC

(Visit Page)

Briky Inc produces custom products that utilize dc motor and blower technology to solve cooling problems in a complete package.

Mooresville, NC

(Visit Page)

Brumley South, Inc., is the World’s Premier source for refurbished KLA-Tencor Inspection Equipment. We are the only ISO-9001 Registered, KLA-Tencor Second Source Refurbisher. All tools Refurbished IN HOUSE. With a large inventory and a dedicated Class 10 Cleanroom, we provide the complete solution, from a fully refurbished system meeting original specifications, to installation to training worldwide, to after-sales service and spare parts support. We only do what we are Experts at! Exchanges,…

Whitsett, NC

(Visit Page)

Founded in 1988 Cable Assembly, LLC is a Lean Enterprise and ISO 9001:2008 Certified business specializing in the manufacturing of wire harnesses, cable assemblies, and electromechanical assemblies.

Wendell, NC

(Visit Page)

We are a contract manufacturing company that assembles printed circuit boards and we have part time engineers on staff that can provide our customers with proto boards and software. We have been serving the Triangle and surrounding areas since 1994.

Greenville, NC

(Visit Page)

CNA CableNetwork has been supplying coaxial cable and other equipment to the cable television industry for nearly twenty years. CNA Technology, LLC., the US-based affiliate of CNA CableNetwork, manufactures and distributes the highest quality drop and trunk line cable from our plant in Greenville, North Carolina. We’ve developed a strong reputation in the industry for quality products, rapid response, and excellent customer service. And because our products are made in the USA, you can expect…

Cornelius, NC

(Visit Page)

Dyebath Monitoring to Optimize Quality and Process Efficiency. Analytical equipment to measure all dye classes (including disperse dyes). Offer consulting services to help optimization in the dyeing industry. The state-of-the-art precise color measurement is used for: - dye make-up tanks - dyebath monitoring - wash-off optimization - effluent control - process control - reliable online pH measurement - any repetitive chemical analysis involving a measurable coloristic reaction

Hickory, NC

(Visit Page)

A full service engineering company that specializes in the design, build, and integration of custom turn-key industrial automation equipment. Certified Fanuc Robotics integrator. CNC machining, custom control panels, (UL certified), and machine retrofits.

Hendersonville, NC

(Visit Page)

Proud to be listed on Manufactured in North Carolina.

Mooresville, NC

(Visit Page)

DCE primarily manufactures custom wiring harnesses used in the performance automotive and racing industries. We also produce data acquisition components and associated electronic equipment.

Mooresville, NC

(Visit Page)

Our company provides quality carbon fiber and advanced composite parts. We have over twenty years of experience designing, engineering and manufacturing everything from Americas Cup sailing spars, to entire chassis and bodywork for racing, OEMs and automotive aftermarket. Our state of the art production facility and advanced manufacturing techniques ensure that each part we produce is held to aerospace tolerances. At deBotech, we utilize a Total Systems Approach, encompassing design support…

Monroe, NC

(Visit Page)

DEHN is a global leader in the manufacture of lightning and surge equipment. With over 100+ years of experience, DEHN serves all industries including but not limited to waste water, petro, communications and manufacturing.

Fayetteville, NC

(Visit Page)

New start-up and change over to automotive specialty services and products. I was doing electrical consulting and musical instrument repair services from 2006 to 2011. Then the industry dried up! I was a service center for 35 major brands of musical instrument equipment.

Leland, NC, NC

(Visit Page)

ElecMech Inc markets, designs and manufactures dc electric micromotors, gearmotors and blowers for the medical, industrial, hunting and Nascar racing industry. Custom design permanent magnet DC both brush type and BLDC types are available. Consulting and expert witness services are also available for patent evaluation.

Wendell, NC

(Visit Page)

We design and produce custom transformers (both Plate and Filament), inductors and custom coils for both commercial customers and CB and Amateur (HAM) Radio customers.

Raleigh, NC

(Visit Page)

Electroswitch Electronic Products was established in 1986 as a unit of Electro Switch Corporation, which was founded in 1946. Electroswitch Electronic Products designs and manufactures high quality switch products for electronic applications. Today, customers can choose from the industry's widest range of standard and custom electromechanical switches. With skilled, experienced design engineers, Electroswitch Electronic Products has the unique ability to offer custom designed switches to…

Newton, NC

(Visit Page)

Enigma LED designs and manufacturers high efficiency commercial lighting fixtures and LED conversion solutions. Our products are primarily retrofit solutions that allow facility managers to upgrade to LED lighting solutions without the costs usually associated with replacing existing fixtures. We also provide new, high quality fixtures to meet the needs of those customers desiring a full replacement. LED lighting technology typically uses 60 – 75% less energy and has a far longer lifespan than…

Raleigh, NC

(Visit Page)

Sales Engineering -- Team for multiple SMT circuit Board Assembly Manufacturing principals. We supply unigue equipement focused on SMT PCBA manufacturer needs. This inlcudes Chip Placers, x-ray, AOI equipment, Conveyors, PCB routers, Reflow ovens, Solder Paste.

Charlotte, NC

(Visit Page)

Our wireless cellular camera systems are powered by the sun and only require a cellular signal to operate autonomously anywhere in the world 24/7/365! Equipped with a 10-day internal battery, our cameras are designed for the worst environmental hazards while providing video & images in blackout conditions. Videos & images are acquired by our camera systems in various methods including, motion detection, scheduled times, and everyone's favorite "live look". Videos & images are sent over…

Creedmoor, NC

(Visit Page)

Firstmark Aerospace manufactures position sensors, under the brand Firstmark Controls, as well as a variety of electronics, motors and other electro-mechanical equipment primarily for the aerospace and defense industries.

Charlotte, NC

(Visit Page)

Flextronics Special Business Solutions is a leading electronics manufacturing service provider with more than 15 years experience in manufacturing and test of complex printed circuit board (PCB) assemblies as well as system integration for a diversified market. Flextronics provides prototyping, new product Introduction (NPI) and Industrialization services for customers. Annual volumes range from 50 to 50,000 pieces, with batch sizes of 1 to 1,000 which demonstrates the scalability and…

Creedmoor, NC

(Visit Page)

Over 30 years experience in delivering high quality systems level integration for a highly diversified market. Specialized focus on the design and manufacture of complex electro-mechanical products, robotics-based equipment and self-service retail kiosks.

Raleigh, NC

(Visit Page)

FloLogic manufactures an innovative, patented and trademarked Intelligent Leak Detection™ system enabling home and business owners to greatly reduce or eliminate the economic and personal loss associated with plumbing failures.

Let's say you and your family return home from a week of vacation only to find your floors covered in a 6" deep sheet of water. Maybe while you were away a toilet sprung a leak, or that tank in your water heater just finally just gave up, or all the…

Charlotte, NC

(Visit Page)

Contract Manufacturer of Printed Circuit Boards, Electromechanical Assemblies, Cable Assemblies, Wiring Harnesses

Mooresville, NC

(Visit Page)

GMI is an Electronic Manufacturing Services provider. We are ISO9001 & 14001 certified through UL/DQS. Our headquarters is in Mooresville, NC, and we have a facility in San Jose, Costa Rica.

Saxapahaw, NC

(Visit Page)

Proud to be listed on Manufactured in North Carolina.

West Jefferson, NC

(Visit Page)

Global Manufacturing Services, Inc. is an electronics manufacturing business that builds and tests sophisticated electronics which vary from big LED arrays to small boards with more than 500 parts. We seek to do this by delivering top quality products at reasonable prices, employing our friends and neighbors and trying to accomplish this while being a good neighbor in our community and with the least negative impact on the environment as possible.

Smithfield, NC

(Visit Page)

Global Skyware has been on the leading edge of engineering, development, and production of sophisticated and reliable Satellite Ground Terminals, Wireless Broadband, and Direct to Home Satellite communication gear for four decades.

Charlotte, NC

(Visit Page)

We custom manufacture high end speakers for the Home Theater and viewing room market. We also carry have the finest ABS in-walls speakers for whole house and listening rooms.

Greenville, NC

(Visit Page)

H&A Scientific, Inc. is a scientific software development firm specializing in pharmaceutical industry support.

Archdale, NC

(Visit Page)

Formerly the Euclid Electric & Mfg. Co. in Northeast Ohio, Hubbell Industrial Controls, Inc. was founded in 1927 and is now located in Archdale, NC. Hubbell Industrial Controls is a worldwide leader and manufacturer of a variety of AC and DC industrial motor controls, components, and accessories. Along with these industrial duty products, Hubbell also services the fire protection and fire safety market. Hubbell acquired Metron, Inc. in November of 2011 adding the Metron® Fire Pump Control…

Raleigh, NC

(Visit Page)

Huemetrix designs and manufactures dyebath monitoring equipment used in the Textile industry. Our instrument can be used to analyze dyeing to optimize resources (time, water, dye, energy), and for QC of incoming dyestuffs.

Charlotte, NC

(Visit Page)

InfoSense, Inc. is a technology-driven corporation formed in 2007 out of University of North Carolina at Charlotte to commercialize a patented acoustic inspection technology. Our technology uses sound waves to non-invasively detect blockages in long segments of sewer collection pipe by either quickly inserting a portable transmitter and receiver into either end of the pipe or thru a network of stationary devices that can maintain continuous assessment.

Raleigh, NC

(Visit Page)

We stock and build a wide variety of raised floor power whips and IEC and NEMA cords, as well as international cables with harmonized ICC wire code jackets. We hold multiple UL certifications and maintain an order fulfillment accuracy rate of 99.8%. As a premier provider of custom power cabling solutions, Iron Box remains dedicated to providing the best quaility service, fastest turn-around times, and best technical support in the industry. Our hand built custom power cords are built in NC…

Maiden, NC

(Visit Page)

LGM is a custom wire winding company. We specialize in wire wound ignition core (the current carrying part of a sparkplug wire). We also make distributed resistance ignition core and rope heaters. We make what the customer wants and deliver it on time.

Statesville, NC

(Visit Page)

JMS manufactures and supplies thermocouples, RTDs, thermowells, temperature transmitter assemblies and related accessories.

Tarboro, NC

(Visit Page)

Keihin Carolina Systems Technology is an electronics manufacturer based in Tarboro, NC. The company uses advanced robotics technologies and automated manufacturing processes to lead the industry in quality performance and to provide world-class products. Committed to environmental responsibility, KCST is certified Under ISO 50001 energy management standard. Intelligent products, some of the most highly sought after products worldwide, are our specialty. We provide these products to our…

Raleigh, NC

(Visit Page)

We supply crystalline nitride semiconductor materials using multiple patented and proprietary crystal growth technologies. We slice, grind, and polish our crystals and also provide thin crystalline layers deposited on sapphire and silicon substrates. We also design, build, use, and supply advanced crystal growth furnaces. We have added a complete machine shop and offer machining services to others. Qualified users can use the machine shop at a reduced rate too. We are experts at writing…

Greenville, NC

(Visit Page)

LBA technology capabilities include RF transmission design, fabrication, integration and supply of systems, components and test equipment for broadcasting, wireless telecoms and industry worldwide, since 1963. Our product lines include antenna impedance testers, RF network analyzers, laboratory and IT security faraday cages, antenna systems, lightning mast and charge dissipater lightning protection systems, AM/cellular detuning and collocation hardware and services, Radio frequency (RF)…

Winston Salem, NC

(Visit Page)

Linortek, a division of Linor Technology, Inc., based in North Carolina, is a design and development company for the “Internet of Things” (IoTs), an industry which involves web connecting products for control and monitoring over the internet. Linortek develops and manufactures various devices with outputs and inputs that allow control, monitoring and alert to be managed remotely. This technology focus and expertise enables users to take full advantage of the new generation of IoTs for…

Greensboro, NC

(Visit Page)

Utilizing state-of-the-art technologies and equipment, Little Creek Electronics is the single source for all of your industrial electronic needs. Our highly skilled technical staff is experienced in offering the best solution for any of your electronic repair needs. A full-service sales and service provider, we take pride in quick turnaround on all repairs or can provide replacement parts for you to install on your own. Our main goal is to help you minimize your downtime!

Hickory, NC

(Visit Page)

We are a quality domestic manufacturer of commercial grade LED lighting products such as wall packs, flood lights, parking lot lights, roadway lighting, and interior office lighting.

Rocky Point, NC

(Visit Page)

Since 1962, our high-quality sound conditioners (also called white noise machines or sound machines) have been known for exceptional audio, ease of use, and durability. We have one goal: to bring serious sleep to millions of people.

Asheville, NC

(Visit Page)

Mathis Electronics is a pioneer and innovator in the Design Programming Prototyping mid to high volume assembly and full dynamic testing of printed circuit boards, all of which carry an extraordinary Lifetime Warranty.

Murphy, NC

(Visit Page)

We are a premier manufacturer of rotating electrical components which include brush and brushless dc motors, synchros, resolvers, rvdts, solenoids, and air movers

Elizabeth City, NC

(Visit Page)

Design and manufacture of speed sensors, specializing in custom development for specific applications. Low to medium volume. Design features include extreme temperature ranges (-450F to 1000F), high vibration resistance, and high pressure capabiliities.

Clayton, NC

(Visit Page)

Multi-Technical Services was founded in 1984 by Lyn Williams and Gary Pleasant to provide custom product design and small lot manufacturing services for several electronic companies in North Carolina's Research Triangle Park. Lyn and Gary both came from ITT Mackay where Lyn was the R&D Laboratory Manager and Gary was one of the mechanical designers. Both had been with ITT for about ten years.

Lyn was responsible for product design and manufacturing, while Gary was responsible…

Raleigh, NC

(Visit Page)

We are a women owned small business. New Phoenix Aerospace is the only company in North Carolina designing and manufacturing Space, Aircraft, Medical and Missile Guidance Components

Fletcher, NC

(Visit Page)

Proud to be listed on Manufactured in North Carolina.

High Point, NC

(Visit Page)

Nimbus Technologies is an electronic manufacturing company providing circuit board and integrated assemblies to manufacturers in diverse industries for the range of applications. Nimbus uses state of the art knowledge, technology, and equipment to provide customers with the products and answers needed in today’s complex business environment. Develops and manufactures complex printed circuit board assemblies and electronic equipment. Our products are used in wireless voice and data…

Graham, NC

(Visit Page)

Design, manufacture & market specialized equipment for measuring and cutting webbing and narrow fabrics.

Barnardsville, NC

(Visit Page)

Ohio Electric is the Right Choice for Your Motor Needs. Ohio Electric Motors is a premier manufacturer of DC motors. Our customers know they can rely on our quality motors to meet their needs. Ohio Electric Motors manufactures: * Brushless Motors, NEMA 42 Frame BLDC and PMAC * Permanent Magnet DC Motors in NEMA 42, 48, 56 and 180 Frames * Motors from 1/8 through 7 HP for Battery Power * Rectified and SCR Rated Power Supplies * Motors with 500 to 5000 RPM * Custom Wound Field Motors…

Hickory, NC

(Visit Page)

OptiConcepts provides a custom array of leading-edge fiber optic products and services on a global scale. From electro-optical simulation systems to fiber optic test equipment to components in diagnostic medical equipment, OptiConcepts products are prominent in various applications utilizing optical fiber around the world. Our expertise includes a broad range of optical, mechanical, and electrical engineering capabilities. We concentrate our efforts on products that assist in the…

Wilmington, NC

(Visit Page)

Orbita manufactures watch winders for high end automatic wristwatches

Raleigh, NC

(Visit Page)

We manufacture alarms and monitoring equipment designed primarily for commercial applications such as communication system, agriculture and large industrial systems. We also provide hardware/software design services with strengths in communications and protocols.

Asheville, NC

(Visit Page)

Palmer Wahl Instrumentation Group is America's First Manufacturer of Precision Industrial Temperature and Pressure Instrumentation. Palmer Instruments and Wahl Instruments, with more than a century of Firsts in temperature technology, have come together to offer a complete line of temperature, pressure, test and calibration instruments from our manufacturing facility in Asheville, North Carolina. Family owned and operated, our history is built on our reputation of outstanding product…

Durham, NC

(Visit Page)

Parata designs and builds pharmacy automation products and services.

Charlotte, NC

(Visit Page)

Parker is an industry leading manufacturer of AC variable speed drives, grid tie inverters, DC drives, servo drives and servo motors. Parker has more than three decades of industry application assistance with OEM manufacturers.

Charlotte, NC

(Visit Page)

Offering retrofit of your existing lighting fixtures to Induction/LED products to save businesses 50% to 70% on their lighting utility bill. Renewable energy, certified to install AV electric car charging stations. Anything GREEN.

Research Triangle Park, NC

(Visit Page)

PAT specializes in prototype and low-volume flip chip assembly services for fine-pitch (75µm) pixel imaging devices and temperature sensitive II-VI and III-V group materials, including: optical, radiation, and bio-medical sensors, and optical/polymer-MEMS. The technology utilizes low-temperature curing, silver-filled (non-leaded) conductive epoxies that are applied using a patented stencil printing technique. High density flip chip interconnections up to 8000 I/O have been achieved using low…

Wilmington, NC

(Visit Page)

Suppliers of electrical and optical components and subsystems for laser-based gas sensing and educational applications. We focus on single-line spectroscopy and we design, build and deliver control circuits and data analysis and display subsystems for this niche market.

Salisbury, NC

(Visit Page)

Protect-R-Shield is a crystal clear silicone based conformal coating service for PCB and LED boards.

Claremont, NC

(Visit Page)

The Prysmian Group is the world’s leading cable solutions provider.

Operating through two of the industry's most respected global brands, Prysmian and Draka, we are ready to connect with our customers and help them respond to their present and future challenges.

The Prysmian Group is the world’s largest fiber cable manufacturer. In North America, our Prysmian and Draka brands have deployed over 80 million fiber miles.

Monroe, NC

(Visit Page)

OEM of Automatic and Manual Pedestrian Door and Operator Systems

Raleigh, NC

(Visit Page)

Revware manufactures three-dimensional measurement equipment and related software.

Monroe, NC

(Visit Page)

We are a manufacturer of specialty detection equipment. We make advanced air sampling smoke detector, linear heat detection cable, and water leak detection cable.

Valdese, NC

(Visit Page)

Saft is a world leader in the design and manufacturing of high-tech battery systems for industrial applications; for use in space, aeronautics, telecom, transportation and defense. Saft has become a world leader by doing what we do best and by bringing all our skills to bear on a common goal. Saft consists of over 4,000 dedicated professionals worldwide - each with different technical backgrounds, united by a unique Saft spirit emphasizing technical excellence, teamwork and customer…

Charlotte, NC

(Visit Page)

STS is an ISO-17025 accredited photometric and radiometric laboratory. We provide calibration services in addition to selling standard lamps. Additionally, we manufacture everything in-house and can customize machinery to fit our customers needs.

Greensboro, NC

(Visit Page)

Premier supplier of coating thickness and film weight measurement systems for diverse industrial applications

Smithfield, NC

(Visit Page)

Manufacturing custom and standard switches and relays , clean paper designing of switches and relays.

Salisbury, NC

(Visit Page)

With nearly 45 years of experience and proven quality, Shat-R-Shield is the original manufacturer of safety coated, shatterproof lamps and lighting products. Shat-R-Shield serves many different industries - including but not limited to - foodservice, manufacturing, medical, food & beverage processors, government and institutions.

North Wilkesboro, NC

(Visit Page)

We produce custom fire pits and grills (names, special events, and some college logos we have trade mark rights)

Goldsboro, NC

(Visit Page)

SPX Transformer Solutions is one of the largest U.S. manufacturers of power transformers and a valued supplier of transformer accessories including a line of Transformer Health Products®, LTC and breaker components and complete transformer service solutions.

Raleigh, NC

(Visit Page)

Stay Online focuses on products for power infrastructure. We offer technical products that are typically hard-to-find elsewhere. Complementing our product offering is our accessible staff knowledge base.

Youngsville, NC

(Visit Page)

SureTech Assembly, Inc. is a leading manufacturer of cable assemblies, wire harnesses and mechanical and electromechanical assemblies. Conveniently located in Youngsville, North Carolina, SureTech is a customer-focused company that provides value-added products and services, utilizing dedicated, experienced employees and state-of-the-art processes. SureTech’s record of producing in excess of 20 million cables annually is accomplished by its commitment to meeting or exceeding customer…

Weaverville, NC

(Visit Page)

Manufacture and sale of Talkie Tapes.

Fuquay-Varina, NC

(Visit Page)

Screen & Digitally Printing Specialist - Manufacturing Graphics Overlays, Decals, Domed Labels, UL Labeling Systems, In-Store Signage for Retail & POP, Poster, Banners, Window Clings, Backlit Signage, Translites, Counter Cards, Shelf Talkers, Floor Graphics, Custom Die Cutting, Heat Bending, Digital Cutting, Routering and Scoring, Kitting and Much More

Belmont, NC

(Visit Page)

We are a small company that specializes in small builds and one time builds. We offer quick turns. We build electronic panels, electronic components, assemble circuit boards, and repair electronics. We can see your project through from conception to production.

Franklin, NC

(Visit Page)

For over 40 years, TekTone has designed and manufactured UL Listed Tek-CARE nurse call, wireless nurse/emergency call, wander management, Tek-SAFE area of rescue assistance systems, and Tek-ALERT alert integration systems. Our distributors stretch worldwide.

Stoneville, NC

(Visit Page)

Sells electric motors Repairs electric motors, servo motors, pumps and gearboxes. Machine shop - fabricating custom parts

Hickory, NC

(Visit Page)

At TNT Motorsports we Manufacture Automotive, Aerospace, and motorcycle components constructed from Carbon Fiber.

Fairview, NC

(Visit Page)

TSS designs and builds scene lighting and arrow boards for public safety departments in an effort to aid them in their dangerous jobs.